through to the outputs. In this setup, you will want to set the Subwoofer LPF
control knob to the desired cutoff frequency for the SP-8S. The Satellites HPF
control knob is not operational with the HPF Bypass switch set to “On.”
If you are using an external bass management device, or if you have an auxiliary
or subwoofer output send, you may want to connect this directly to the SP-8S
while connecting your main L & R outputs directly to your “Mains,” or stereo
L & R speakers. In this instance, you may use either the Input-L or Input-R
connections on the SP-8S.
In this setup, you will want to set the Subwoofer LPF control knob to the desired
cutoff frequency for the SP-8S. Once again, the Satellites HPF control knob is
not operational with the HPF Bypass switch set to “On.”
Connecting an Additional Subwoofer
If you have a large monitoring environment requiring greater subwoofer sound
pressure, you can connect as many SP-8S cabinets as desired in a daisy chain.
Simply connect the Extra Sub Output (located in the Output section) to the Input-L
or Input-R input of second SP-8S (you may use the Extra Sub Output to connect to
another brand of subwoofer). In this instance, you will want to have the HPF Bypass
switch set to “On” on the second SP-8S subwoofer so that bass management is not
repeated in the second sub.
SP-8S
Input
L or R
Input
Input
Left Satellite
Left Satellite
Right Satellite
Right Satellite
Subwoofer
External Bass Management
7
Summary of Contents for Studiophile SP-8S
Page 2: ...2...
