Operation Panel Features
1. Pitch Bend Wheel:
The Pitch Bend wheel is used for raising or lowering
the pitch of a voice during performance, starting from and always returning
to a center “detent” point. The range of pitch values depends on the sound
generator (sound card or module) being used. Please refer to the manuals of
your devices for information on how to change the Pitch Bend range. To
bend the pitch up, move the wheel away from you. To bend the pitch down,
move the wheel towards you.
2. Modulation Wheel:
It is very common to use the modulation wheel to
change the intensity of effects, such as Vibrato (pitch change), Tremolo
(change in volume), and Modulation (change in tone).The Modulation Wheel
produces a vibrato effect shortly after the sound is generated, and is most
effective for solo instruments such as saxophone, strings, and oboe. Similar
to the pitch wheel, the actual effect and range of that effect will be set within
your MIDI sound module.
3. Controller Sliders:
These eight programmable sliders can be used to send
any MIDI controller data on any MIDI channel. This is perfect for use with
hardware and software synthesizers, for automating software mixers, or for
controlling any devices that will respond to MIDI commands. In the next
section, the “Set Controller Key” instructions will show you how to program
this special feature.
12
