LEGEND
1.
Manual drive of the extractor
2.
Honey extractor rim
3.
Honey extractor leg
4.
Honey extractor drum
5.
Honey extractor valve
6.
Honey extractor lid
7.
Honey extractor beam
3.2. ELECTRIC HONEY EXTRACTORS
Honey extractor with a small
-
diameter drum,
characterised by universal features as it may extract
almost all types of frames. This type of extractors is
characterised by the necessity to rotate the frames.
Diagonal extractors are intended for those beekeepers
who possess small apiaries as well as to those treating
beekeeping as a hobby.
3.2.1.Technical parameters :
•
Extractor basket, made of stainless and acid
resistant steel rods, thickness of 2 mm and 5 mm,
spaced in the way to protect the frames against
comb breaking out during extraction. Size of the
mesh: 20x20 mm, the basket with additional
bearings in two housings, upper and lower one.
•
Radial basket made of stainless and acid-resistant
steel bars, thickness 8 mm, equipped with frame
fixing, laser cut, the basket with additional bearings
in two housings, upper and lower one.
•
The drum made of stainless and acid-resistant steel
plate 0H18N9. Drum bottom in conical shape,
which allow for honey to drain freely, properly
reinforced and stiffened.
•
Rim, legs and upper beam powder coated
•
Transparent lid, made of metaplex, thickness mm.
•
Plastic hinges
•
Safety lock mounted on the strip
•
Electric drive mounted at the bottom. Engine:250W
/ 24V.
•
Stainless flap valve
•
Controller supplied by 12V DC or 230 V AC - SDD-
2DP
3.2.2. Diagram for electric honey extractor
LEGEND
1.
Engine cover
2.
Honey extractor engine 250W/24V
3.
Honey extractor controller SDD-2DP
4.
Honey extractor rim
5.
Honey extractor drum
6.
Honey extractor flap valve
7.
Honey extractor leg
8.
Honey extractor lid
9.
Fastening strip
3.3. DIAGONAL HONEY EXTRACTORS WITH
COMBINED MANUAL AND ELECTRIC DRIVES