Photo 1
7 1 6
16 8 17 10 15 14
Photo 2
5
16 10 11 12 13 14
Photo 3
19 9 3 1 2 4 6
18 16 17
3.2.
Honey extractor technical parameters
Honey extractor drum
It is made of acid-resistant stainless steel with a
thickness of 0.6mm. Appropriate placement of the rim
additionally strengthens the drum structure.
Basket construction
Universal tangential basket made of acid-resistant
stainless steel bars arranged to protect the frames
against breaking the honeycombs out during
spinning. The basket is mounted in a slide-thrust
sleeve. There are latch slots on the upper edge of the
basket grids.
Electric drive
The honey extractor is powered by 230V / 200W
mains voltage. An MDD controller was used with a
potentiometer regulating the engine revs and a switch
adjusting the drum inclination. The engine and
gearbox are mounted on the upper beam.
Cover
Transparent, made of 3mm thick metaplex, protects
the user against the danger of contact with the
rotating basket and against dirt.
Drain valve
Stainless steel 6/4 ”flap
Honey extractor rack
Powder coated rack with level control
