6
Through UP, DOWN keys to select Testing, press ENTER button to
enter debug function via UP, DOWN keys Scanner, Color, Size, Invert
functions as follows, press EXIT to return
Scanner Sets scanning speed galvanometer lamp:
Through UP, DOWN keys to select Scanner, press ENTER button to
enter (30KPPS), at the same time by UP, DOWN keys to select
10KPPS-30KPPS, press EXIT to return.
Color sets the lamp color mode:
● Through UP, DOWN keys to select Color, press ENTER button to
enter, through UP, DOWN keys to select Single1-7, Single1-7Are seven
kinds of monochrome modes, namely re-election RGY, RBP, GBC, RGB,
WYCP.
5.Choose settings:
Through UP, DOWN keys to select Setting, Press ENTER button to
enter the setting function via UP, DOWN keys to select Light, One Beam,
Master, Default functions are as follows, press EXIT to return.
Light sets the display light functions:
Through UP, DOWN keys to select Light, press ENTER button to enter,
through UP, DOWN keys to select ON (display lit), 5S (display light off
display after 5 seconds), press EXIT to return.
One Beam set whether to open a beam of light protection:
Through UP, DOWN keys to select One Beam, press ENTER button to
enter, through UP, DOWN keys to select OFF (closed beam of light), ON
(open beam of light), press EXIT to return.
Master sets whether to open the host function:
Through UP, DOWN keys to select the SETC, press ENTER button to
enter, through UP, DO WN keys to select OFF (off the host), ON (open
host), press EXIT to return.