10
process.
If your DMX-512 signal control station is a 5-pin XLR socket
(head), you must use a 5-pin to 3-pin from the conversion line,
specific conversion method as shown below:
3
：
3
：
3
：
5
：
3
：
5
：
When the console control signal input to the full color
animation laser performance device, all full color animation
laser performance device must first set address code. In order
to
Role of the corresponding control signal. So, when using
any controller, each lamp must have its own address code. So,
in the The first lamp address is set to 1, second sets of lamps
address code is set to 13 (the first lamp address codes 1 and
12 channel),
Third table lamps set in position 25. And so on (this
setting is required according to control different set, now only
with common people).
The specific DMX-512 signal control mode of address
code switch is arranged as below:
The lights
The starting address
Digital display
（
ON
）
1
1
A0.01
2
13
A0.13