www.lynxnet.co.nz
TELEPHONE CABLE CONNECTION
7
BY
PA
SS
LINK
S
JP1
JP2
SECURITY
Main phone line input
Security
alarm panel
Remove links when
alarm installed
Telephone Distribution PCB
Optional second line input
Telephone line(s)
Connect the main incoming
Telephone line as shown below.
Provision has also been made for
the second line as shown
Security Alarm Panel
If a Security Alarm panel
is installed, provision has
been made to allow the main
Telephone line to pass through
the Security panel. This enables
the security system to take
priority over the line in the event
of an activation.
Using standard two core cable,
connect the security panel as
shown above. Remove the two
“Links” JP1 & JP2 to allow the
phone line to pass through the
system.
