www.lynxnet.co.nz
10
IR COMPONENTS
IR TARGET
The IR target is used to receive IR signals from
a typical remote control. The IR target should be
installed in close proximity to the television using
the adhesive pad on the rear.
Note:
Ensure the IR target is in full view of the remote
control for correct operation of all devices being
controlled.
The IR emitter is used to transmit IR signals
received from a typical remote control via an IR
target. A second IR target is available to control
an additional product.
Note:
Ensure the IR emitter is placed directly over the
receiver window. This is critical for the product
to receive IR signals.
IR Target
Television
Reciever eye
Adhesive pad on rear
Sky decoder / DVD
IR Target
Part Code: L
N-IRT
IR Emitter
Part Code: LN-IRE
Place emitter
over IR window
IR EMITTER
IR Emitter
IR Emitter
Adhesive pad on rear
