SEDONA SiDE burNEr AccESSOry cArE & uSE/iNStAllAtiON
|
11
mATCh LiGhTinG
using a paper match or a utility lighter, hold a flame over
the burner ports while you push and turn the control knob
of the corresponding burner to the “lite” position. Keep
your face as far away from the burner as possible.
if the burner does not light in 5 seconds, turn the knob off
and wait 5 minutes before attempting again.
read the ‘user manual/installation instructions’ carefully
and completely before using your accessory to reduce the
risk of fire, burn hazard or other injury.
Low heAT fLAme AdjusTmenT
the burners on your lynx accessory feature an adjustable
low setting.
fluctuations in gas pressure, gas conversion and even in the
quality of the gas itself may affect burner performance at
the “lOW” setting. it could be either too high or too low.
To adjust the burner for low setting:
1. make sure the grill accessory is cool.
2. remove the grates so that you can see the flame while
adjusting the burner.
3. light the burner and set it to “lOW”. (all the way coun-
ter- clockwise).
4. pull off the control knob.
5. While holding the valve shaft with pliers, insert a thin
flat-blade screwdriver into the shaft and, while watching
the flame, adjust it to a minimum stable setting.
Lighting instructions for ALL Accessories
...
continued
use a small screwdriver for low
setting burner adjustment.
