
LX-V12
LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com - [email protected]
Select "Internet Protocol (TCP / IP)" and click on
properties.
Select: “Use next IP Address” And write as you wish, in
order to configure your network.
Normally, Ip values will be something like this:
IP Address: 192.168.1.xxx
Subnet Mask: 255.255.255.0
Where xxx will be a number between 1 and 254
Accept to quit the network settings and again to apply them
at the next screen. Depending on the Windows Version,
you will be asked to reboot or not.
Once the Computer is configured with a static IP proceed
to connect to the line array system through the OCS (online
control system) software.
Open the OCS software and from the Initial Screen choose
Etherner device into the configuration menu.
It will open a different screen, as follows, there you can see your Network configuration, and the cabinets currently
connected.
17
Summary of Contents for LX-V12
Page 37: ......