9
CARE AND USE/INSTALLATION
The unit is shipped with the (2) shelves taped in place in
the upper and the lower shelf positions. Remove them from
the refrigerator and arrange them as follows when setting
up your unit.
If you are not serving beer or wine on tap, your keg dis-
penser can be used as a refrigerator by placing both
shelves on the mounting brackets as shown in Figure 13.
The shelves are marked upper and lower, The upper shelf
should be placed in the top shelf position and the shelf
marked lower should be placed in the bottom shelf position.
Stored upper and
lower shelves
on side
Two shelves
installed
Figure 12
If you are using a quarter barrel of beer or wine, you can
add shelf space for keeping your mugs chilled. The quarter
barrel must set on the floor, it cannot fit on the shelf, see
Figure 14. Be sure the white floor plate is in the bottom of
the interior compartment before positioning the barrel.
Figure 14
Half barrel (keg)
Installed upper
shelf above
barrel
Figure 13
Quarter barrel
Figure 15
If you are using a half barrel (keg) or (2) 1/6 barrels, place
the two shelves on the right side of the keg dispenser on
the two mounting hooks for storage. (See Figure 15). Be
sure the white floor plate is in the bottom of the interior
compartment before positioning the barrel(s).
Two shelves
White floor plate
White floor plate
USING YOUR BEVERAGE DISPENSER
Stored lower shelf
If you are using the appliance as a refrigerator for per-
ishable foods, the set-point temperature should be set
between 34°F and 42° F (1.2° C and 5.7° C).
!
CAUTION
Shelving
