Lynx L27-2, Care & Use/Installation Manual

Page: 19 / 48

19
grIll won t lIght
Your Lynx grill uses an electric
ignition system that does not
spark. The igniters should
glow constantly when a
spark. The igniters should spark. The igniters should
control knob is pushed in.
first, confirm that the grill is
control knob is pushed in. control knob is pushed in.
getting electricity by turning
on the lights.
CheCK The igniTers
Ensure that all burner
controls are set to off. off off
Remove the racks and
briquette trays.
Watch an igniter as you
push in and hold the
corresponding control
push in and hold the push in and hold the
knob. You will need either
corresponding control corresponding control
a small mirror or shiny
metal object to see the
igniter under its cover.
►



(Be sure you push in the
correct control knob and
(Be sure you push in the (Be sure you push in the
keep the knob in the
“off
keep the knob in the keep the knob in the
” position)
keep the knob in the keep the knob in the
check the remaining
igniters. If igniters don’t
heck the remaining heck the remaining
glow, proceed with trou-
bleshooting or match-
glow, proceed with trou glow, proceed with trou
light the burner.
chEcK ThE BURnERS
If the igniters are working
check to see if gas is
If the igniters are working If the igniters are working
reaching the burners by at-
tempting to match light a
burner.
tempting to match light a tempting to match light a
BE cAREfUL! If ThE
burner fA ff ils To igniTe,
wA w w iT 5 MinuTes before
ATTeMPTing To igniTe
oTher burners!
(See
indeX: “Match lighting” for
further details.)
If match lighting doesn’t
work, re-check fuel connec-
If match lighting doesn’t If match lighting doesn’t
tions for leaks and ensure
the supply is of the correct
type and is of adequate
the supply is of the correct the supply is of the correct

►
yellow flame or gas
smell whIle CooKIng
if you sMell gAs while
The grill is oPerATing,
iMMediATely T ely ely urn off All
burners And shuT off
The MAin fuel suPPly. ly ly
PerforM A leAK TesT
(see indeX: “leak Test” for
further details.)
CheCK for blo CK CK CKAges
(see indeX: “Clean the brass
burner” for further details.)
►
►
troubleshooting your lynx ll grill
X: “leak Test”
for further details.)
If the burner will light with a
match, then the igniter may
not be functioning correctly.
match, then the igniter may match, then the igniter may
call for service.
not be functioning correctly. not be functioning correctly.
If the burner will not match
light, and you know you are
getting gas, wait for any
light, and you know you are light, and you know you are
gas to dissipate and remove
the burner and check it for
gas to dissipate and remove gas to dissipate and remove
blockages.
(see indeX: “Clean
the brass burner” for further details.)
before you Call:
Please check a few things before you call for service
:
Is there fuel supplied to the grill?
is the main shut-off valve open?
Are you using correct type of fuel? (lP or natural gas)
(see indeX: “gas requirements” for further
details.)
is your propane cylinder empty? have you recently refilled the propane cylinder? if so, is the
connection tight?
s your propane cylinder empty? s your propane cylinder empty?
have you opened the valve on the propane cylinder?
Is the grill plugged in to a live electric circuit?
if you’ve checked the above items, review the trouble-shooting list below before calling for lynx for ll
service.
►
►
►
►
►
►