LYNX Pro Audio S.L. -
Valencia, Spain -
www.lynxproaudio.com [email protected]
HR-series
To connect the speakon follow the instructions in fi g. 1
Insert the male speakon in its corresponding hole and turn right until it clicks. This fi xes it safely and strongly and
helps stop it being pulled out by mistake. At the other end of the cable connect in the same way to the amplifi er
channel.
2.3 Recommendations
Always ensure cables are in good condition. Know the recommended cable length and thickness according
to the cabinet and quantity you are installing. An incorrect connection can affect the functioning of the system
or even damage it. Cable thickness will vary according to cabinet impedance, quantity and distance. This is
especially important when connecting Sub-bass cabinets.
As a guide, please see the following table which outlines the thickness depending on the power and length of
cable.
Bear in mind Ohm ratings on the amplifi ers used to power the cabinets. For example, 2 ohm amplifi er
confi gurations are not recommended due to the excessive power from the amp output.
Never connect more cabinets than recommended in parallel. With parallel connections, the total impedance
can be calculated by dividing the impedance of 1 cabinet by the number connected.
6
