Lynx All-Sear series, Use And Care Manual

Page: 12 / 44

12
|
ALL-SEAR CARE & USE/INSTALLATION
MANUAL LIGHTING
If a burner doesn’t light after several attempts, it can be
match lit using the lighting rod stored in the drip tray.
First, make sure you’ve returned all of the control knobs
to the OFF position and have allowed 5 minutes for any
accumulated gas to dissipate before attempting to match
light a burner.
ProSear™ 2 Burners
To match-light the burners, use the lighting rod to insert a
lit match through the cooking grate.
Push and turn the corresponding burner control knob to
“LITE”. If the burner doesn’t light within 5 seconds turn the
knob off and wait 5 minutes before attempting to light it
again.
LIGHTING YOUR GRILL
... continued
Extremely cold temperatures may cause your
ProSear™ 2 burners to light inside the burners
instead of outside. Once lit, if you hear a ‘whoosh-
ing’ sound, immediately turn the burner knobs
off to extinguish the flame and then immediately
re-light the burners.
COLD WEATHER WARNING:
PROPANE