139-0498-02.5
5
Chapter One--Overview
This bulletin explains how to install and operate the LynTec
Remote Power Controller (RPC) and the RPCR relay panel.
The controller uses remotely operated circuit breakers to
control up to 167 remotely operated branch circuits. In the
case of the RPCR, the controller can control up to 64 relays.
Control signals originate externally from commands received
via the communications network or from dry contact inputs.
Acceptable communications protocols include TCP/IP, RS-
232, sACN and DMX-512. RS-485 optional.
OVERVIEW
Chapter 1--Introduction
CONTENTS
Each RPC comes standard with the following components
installed:
• RPC
Controller
• Power
Supply
•
Capacitive Buffer (optional on RPCR)
•
Isolated technical ground (panels only)
•
15A unmotorized breaker(panels only)
•
Voltage Transducer (panels only)
Optional additional components include:
•
I/O expansion board
•
I/O-R outbound relay control board
•
Multi-panel expansion board (panels only)
•
Current Monitoring (panels only)
Introduction