139-0647-01.17
17
Chapter Five--Control Setup
Network setup
Figure 5-2--Network Confi guration
Figure 5-2 shows the network confi guration portion of the
Network setup.
Basic date and time information will be displayed in the
Clock Set fi elds. Verify that the year, month and day are
correct. Set the hour to the appropriate time for your time
zone and verify that the minute displayed is correct. Save
this information by clicking the Update Information button
below the Clock Set portion of the window.
Click the radio buttons for any pages to be printed out
under the Printable Pages header. To print the Network
Setup, Panel Setup or Panel Schedules pages at any time,
ensure the desired buttons have been selected and then
click the Print Pages button to the right. Please print a
copy for your records after setup is complete.
This screen shows the current network values. If DHCP
is enabled then the fi elds will be greyed out. It is
recommended that the user consult with the network
administrator before changing these values.
The IP, Subnet and Gateway addresses are only used in the
following situations:
• When DHCP is disabled
• When DHCP is enabled, but there is no DHCP server
available on the network
• When the NPAC provides DHCP addresses
If DHCP is enabled and available on the network, all these
values will be obtained from the DHCP server.
If DHCP is disabled and a static address is used, save
changes and then press “Reset NPAC” to apply changes.
