Page
of 34
22
SetDefault Tab
SetDefault enables you to re-boot your handheld in case of problems. Proceed as follows:
Set Registry Default” will restore all registry settings to their default va-
lues. This is usually done when registry settings are changed/corrupted
manually or by some pure written application. Performing this operati-
on must be confirmed by entering the following password:110793.
Set Factory Default” will restore the whole Operating System to
all defaults. This is usually done when the operation of the whole
Ope- rating System has become instable for any possible reason.
Perfor- ming this operation must be confirmed by entering the
following pass- word:180239.
PowerScan Tab
PowerScan enables you to define how the PowerScan will run. At delivery, PowerScan ope-
ration is disabled.
There are two ways of running the PowerScan:
Check the first check box to get first a laser point by pressing the trigger and then a laser line
by releasing it and have the bar code been read.
Check the second check box to get a laser line by pressing and releasing the trigger and
have the bar code been read.
CradleSetting Tab
CradleSetting enables you to setup how the cradle will run.
Check the first check box to have all accessories connected to the cradle powered when
inserting the handheld into the cradle.
Check the second check box to automatically switch to hands-free audio equipment (micro-
phone and speaker) when inserting the handheld into the cradle.
PowerWarning Tab
PowerWarning enables you to be acoustically informed about changes in hardware power
management , e.g. switching between internal and pistol grip battery, notification of atta-
ching/removing AC adaptor, start/stop charging etc. In this case, check the second radio
button.
By default, there is no sound warning.
