Lyngdorf Audio SDAI 2175, Owner'S Manual

Page: 15 / 20

1 5
Trigger connectors
The SDAI 2175 is equipped with a TRIGGER OUT 3.5mm mono jack connector. The Trigger signal is a
12V short circuit protected output signal for powering up external equipment when the SDAI 2175 is on,
e.g. remotely connected SDAI 2175 power amplifi ers or active subwoofers.
Cleaning and maintenance
Always unplug the unit from the electrical outlet before cleaning.
This unit does not require any regular maintenance except to keep its exterior clean. Simply wipe its exte-
rior with a clean soft cloth. A small amount of non-abrasive cleaner may be used on the cloth to remove
any excessive dirt or fi ngerprints. Do not use abrasive cleaners or cleaners containing liquid solvents.