background image

- 10 -

- 1 -

Auto Advance Remote Target System

The new Lyman Auto-Advance Remote Target System is a revolutionary design,

offering the advantage of remote target advancement previously only found in expen-
sive industrial systems. The Auto-Advance Remote Target System will advance your
targets with the use of a hand-held remote controller at distances of up to 200 yards.
No more walking downrange to replace targets, or waiting for a cease-fire to be
called. Advance to the next target without getting up from your shooting bench! The
Auto-Advance system is battery operated, so there is no need for access to power
outlets, plus it disassembles easily for transportation back and forth to the range. The
Auto-Advance system has protection plates that are rated for use with all rimfire cal-
ibers. The legs of the stand use standard and inexpensive electrical conduit tubing
available at any home center. This makes replacing damaged legs simple and also al-
lows for customizing target heights to suit your particular needs. The Auto-Advance
System comes with a roll of standard bullseye targets. Additional 50 foot target rolls
are available with bullseye, small bore rifle, animal and silhouette designs.

Warnings

• The Auto-Advance System is rated for use with rimfire calibers only. The use of

centerfire caliber firearms will void the warranty.

• Use only on ranges and areas where you are sure of having a safe backstop and

that any ricochets will be deflected in a safe manner. 

• Follow all safe firearm handling procedures.

• Keep firearms unloaded and pointing in a safe direction when anyone is down-

range.

• For adult use only. Children should be properly supervised by adults if using this

product.

• Be sure to follow any and all range rules regarding target stands.

Specifications

• Overall dimensions: 24” wide x 29” deep x 60” tall (variable)

• Weight: 30lbs

• Target Roll: 18” wide x 50’ long

• Remote system: 433

.

87

MHz, 200 Yard capability

• FCC ID: 

2AG7Y-4320071

• Battery requirement: Transmitter: 9V / Receiver: 8 x AA

A

TARGET ROLL, 50FT LONG

BULLSEYE (INCLUDED) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320075

SMALL BORE RIFLE (OPTIONAL)  . . . . . . . . . . . . . . . . . . . . . . . . . . .4320076

SILHOUETTE (OPTIONAL) . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320077

VARMINT (OPTIONAL)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320078

B

FIXED ROLLER STUD ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . .4320101

C

ROLLER STUD ASSEMBLY  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320102

D

LOCKING LEVER  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320103

E

UPPER STEEL PLATE  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320104

F

WING NUT, EACH (6 REQ'D)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320105

G

CRANK HANDLE . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320106

H

LEGS, SET OF 4, 29"  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320107

I

LOWER ASSEMBLY WITH MOTOR  . . . . . . . . . . . . . . . . . . . . . . . . . .4320108
AND RECEIVER (INCLUDES NEW REMOTE)

J

REMOTE (CONTACT LYMAN WITH UNIT SERIAL NUMBER) . . . . . .4320109

K

CROSS BAR  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320110

L

FOOT, EACH (2 REQ'D)  . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320111

M

LANDSCAPE SPIKE, SET OF 4  . . . . . . . . . . . . . . . . . . . . . . . . . . . . .4320112

Summary of Contents for Auto Advance Remote Controlled Target System








Reviews: