* *
Home Central Audio HS-8250
15
Adjust the date of Week option to display of a specific day (e.g. Monday). In this case, the other
options on the interface will display all the information of the first timer point on that day. If there is
no display for other options on the interface (Fig. 6-1-2) (next page), it indicates there is no timer
point on that day. To add a timer point, firstly press “Add” option and then set the other options. If
there is a timer point on this day, it is needed to add a new timer point. In this case, please firstly
press “Add” option and then program the other information for this timer point. The serial number
of the added timer point will be always sorted at the end of all timer points on that day. But the
execution of the timer point will be automatically in accordance with the time sequence.
6.1.3 Serial Number Setting:
Rotate the digital wheel to move the cursor to the number pane behind the "Serial Number” option
and then press the digital wheel once, so that the icon
will appear behind the pane. Then,
rotate the digital wheel to load the number to be selected. After that, press the digital wheel once to
confirm and exit.
6.1.4 Power Setting:
This operation is used for timer control over the power output socket on the rear panel of the
equipment (Item 8 on Page 4). The socket provides AC220V output for other equipment. Setting
the power to “ON” indicates that the output socket will have power output upon arrival of timer
point. Setting to “OFF” indicates that the output socket will have no power output upon arrival of
timer point. Setting to “…” indicates default, that is, keep the last setting. The operating method is
same as that for serial number.
6.1.5 Time Setting:
This is used for setting the start time of timer point. The time may be accurate to second based on
24-hour system. The method for time setting is same as that for serial number.
6.1.6 Ringer Setting:
This is used for setting the ringer type on timer point, available with four options, i.e. “1, 2, 3 and –“.
“1” refers to note “1 3 5 1”; “2” refers to note “1 5 3 1”, “3” refers to note “1 5 1 5”; and “-“ refers to
no selection of ringer. To set the ringer, rotate the digital wheel to move the cursor to “Ringer”
option and press the digital wheel once, until the icon
appears. After that, rotate the digital
wheel to select and then press the digital wheel again to confirm and exit.
6.1.7 Timer Setting for MP3 Track
Rotate the digital wheel to move the cursor to “MP3 Setting” option. Then, press the digital
wheel once to enter MP3 Timer Setting interface (Fig. 6-1-3). Under this interface, you may
select 3 tracks for play on MP3 player at the timer point. “00/00” represents the music to be
played, with the first two numbers indicating the directory of the music and the last two
numbers indicating the serial number of the music in this directory. Setting the directory to
“00” indicates no directory, and setting the music to “00” indicates no selection of music.
Move the cursor to the small pane displaying the number. Then, press the digital wheel
once until the icon
appears behind the number pane. Rotate the digital wheel to select
between "Not Cycle”, “Cycle” and “Sequential”. This setting is used for controlling the play
sequence of 3 tracks selected.
After completing the above operations, press “Confirm” to confirm the setting and exit the
