* *
Home Central Audio HS-8250
10
can be manually selected from the host panel, they can also be selected by pressing the
/
SOURCE
- on infrared remote controller.
2) Total Volume / Tone
Rotate the digital wheel * to move the cursor to “Total Volume/Tone”
option and press the digital wheel # once to enter “Hall Total Volume / Tone Control" interface
(Fig. 3-3), where you can control the total volume and tone of zone 1 (hall) and carry out ringer
testing. For control of the volume and tone, please refer to the Operating Methods for Control
of Zone 2~12 Volume and Tone. It will not be repeated here.
3
）
Speaker Setting Rotate the digital wheel * to move the cursor to “Speaker Setting” option and
press the digital wheel # once to enter the “Hall Speaker Setting” interface (Fig. 3-4) (Next
page). Among the setting options:
Testing: Used for testing if the speakers work normally. The “Normal” option refers to the
current program being played. Then, exit the test state.
Front: It is provided with two options, i.e. Big and Small, used for setting big sound box or
small sound box.
Center: It is provided with three options, i.e. Big, Small and None. Except for setting the big
sound box or small sound box, it is also used for setting the center signal YES or No under
AUTO and Dolby Pro mode. If setting to “No”, the center signal is distributed to the two
loudspeakers on left and right.
Surround: It is provided with three options, i.e. Big, Small and None. Except for setting the big
sound box or small sound box, it is also used for setting the surround signal YES or No under
AUTO and Dolby Pro mode. If setting to “No”, the surround signal is canceled.
Sub Woofer: It is provided for setting sub woofer signal YES or No under AUTO and Dolby Pro
mode. If setting to “No”, the sub woofer signal is distributed to the two loudspeakers on left
and right.
The above settings can be done by using the digital wheel, or by using the key
and
. After setting, press “Confirm” to confirm and exit the setting interface.
4
）
Independent Volume Rotate the digital wheel * to move the cursor to “Independent Volume"
option and press the digital wheel # once to enter the “Hall Independent Volume Control”
interface (Fig. 3-5).
（图
3-2
）
（
Fig.3-3
）
（
Fig.3-2
）
（
Fig.3-4
）
（
Fig.3-2
）
Press digital wheel
or
Press digital wheel
Or
Press digital wheel
Or
HALL CONTROL
DVD
SOUR.
VOL. & TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP
OK
HALL VOL. AND TONE CONTROL
CHIME TEST.
VOL.
TREB.
BASS
OK
HALL CONTROL
DVD
SOUR.
VOL. & TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP
OK
HALL SPEAKER SETUP
NORMAL
TEST
LARGE
FRON.
LARGE
CENT.
LARGE
SURR.
OK
HAVE
WOOF.
HALL CONTROL
DVD
SOUR.
VOL. & TONE
SPK. SETUP
SEPA. VOL.
MODE SETUP
OK
HALL SEPARATE VOLUME CONTROL
FRON.
CENT.
SURR.
WOOF.
OK
