FlarmView² Version 2.60
April 2018
Page 26 of 31
6
Editing of a task
In the Task page, the user can enter or edit the task. Waypoints can be loaded into a task
from the active waypoint file.
In the task page you can press the edit button. Using the up or down button you can
highlight an existing waypoint or empty space and then set a new waypoint. By pressing the
Ins. (insert) button you can start browsing through all of the waypoints in the selected CUP
file.
Selecting from a list of waypoints is very intuitive. The FlarmView
2
will only offer you a
choice of characters that are available from the list of waypoint names available. Using the
button “>>” you can move to the next character (right), the red part of the label
B
indicates one space back or one character to the left using a longer press of the button. A
similar function for the “OK” button, where you can confirm a selected waypoint or with the
C
, you can cancel the selection of a waypoint. The previous waypoint will then be selected.
When you are back in the Task menu, you can
Ins
ert or delete
D
the
waypoint.
To
insert
a waypoint you make a quick press on the
Ins.
and to
delete
a
waypoint you press and hold down
D
for about (not more than) a second
Each waypoint can have a custom zone or area applied.
These areas can be modified by pressing to Zone button.
