Connect USB Devices
Connect USB Devices
The Kärv provides the following Type A ports:
l
internal USB port, accessible when the service lid is removed
l
two external USB ports (see below)
l
a USB port via a
dongle cable attached to the multipurpose port
.
Plug the desired device, such as a USB mouse or storage device, into the USB port. Refer to
Start | Help and Support
and
the documentation for your USB device for more information.
USB devices may be installed, removed or swapped without turning off the Kärv.
External USB Ports
Connect Ethernet Cable
Note: Use of a shielded cable is required to maintain emissions and susceptibility compliance..
Connect Ethernet Cable
1. Insert the network cable and ensure it is firmly seated in the connector jack.
2. To remove the Ethernet cable, press the release tab on the cable end.
E-EQ-VX8OGWW-G [ 10 ] Kärv User Guide
