Field Verified
Configuration Guide
PN: 1725-36052-001_G.doc
6
Access Point Configuration
1.
Connect to the AP(s).
2.
Perform the configuration steps in the
AP Manager
software.
You can configure multiple access points at the same time via the
Select All
option).
Ensure that the APs are properly configured to communicate with
wireless clients.
3.
Go to
Access Point Properties
and confirm that the AP software
version listed corresponds to one of the software versions on page
one of this Configuration Note.
4.
Select the AP(s) from the
Managed List
in the
Access Point Manager
main window and select
Edit
.
5.
Select
Wireless Interfaces: Advanced
and confirm that the
RTS/CTS
Medium Reservation Threshold
is greater than 600 or disabled.
6.
Go to
Access Control: Radius Server
and disable Radius access control
by clearing the check box for
Enable Radius Access Control
.
7.
Return to the
Edit
window.
8.
Go to
Bridge: Advanced Bridging
:
a.
Disable
Enable Proxy ARP Function
.
b.
Disable
Enable IP/ARP Filtering
.
9.
Return to the
Edit
window.
10.
Set the
Multicast Transmit Rate
to
11Mb/s
.
11.
Restart the AP(s) by closing the
Edit
window and selecting
Yes
to
save the new configuration.
The AP is now ready for use with SpectraLink 8000 Wireless
Telephones.
