PAN WASHERS
Does the "power on" light
illuminate when the power
switch is turned to the "on"
Is the wash tank filled with water
(water visible above scrap trays)?
position?
NO
Is there incoming 3-phase power
at the control panel?
Is there power on the primary
(input) side of the transformer?
Is there power on the output side
of secondary transformer fuse?
Verify that the low water cut-off is
working by checking for power at
Call LVO Mfg. for technical
support at 1-800-346-5749.
terminal #4 on the lower terminal
block strip.
Fill the wash tank using the manual
fill valve or the auto fill button (if
equipped with this option).
Correct incoming power supply
problems.
Check primary fuses on the
control panel.
Secondary transformer
fuse is blown or the
low water cut-off.
transformer is defective.
Does the wash light
illuminate when the start
button is pushed?
Is the door
fully closed?
Close the
door.
Is the pump circuit
breaker tripped in
the control panel?
YES
YES
YES
YES
YES
YES
NO
NO
NO
NO
NO
Is the overload relay
tripped on the motor
starter for the pump?
YES
NO
NO
Call LVO Mfg. for technical
support at 1-800-346-5749.
Reset the
circuit breaker.
Push the
reset button.
NO
NO
YES
YES
Check the door switch for proper
adjustment and function.
YES
Pan Washer Doesn't Run
Defective or damaged
