LVO Manufacturing, Inc.
LVO Manufacturing, Inc.
LVO Manufacturing, Inc.
LVO Manufacturing, Inc.
808 N. 2
nd
Avenue E., P.O. Box 188
Rock Rapids, IA 51246
www.lvomfg.com
(712) 472-3734
1-800-346-5749 Fax (712) 472-2203
__________________________________________________________________________________________________________________________________________________________________
4
FL14 Specifications
Overall Dimensions
Width – 36”
Depth – 53” (54 ¾” Gas)
Height – 84 ¾”
Height with door open – 106”
Door opening – 32” wide x 30” high
Hot Water System
½” hot water supply required, union provided
140°F water required at the machine
78 GPH at 20 PSI (6 ½ gal/cycle x 12 cycle/hr)
Rinse booster: (1) 9 kW heating element in a 9 ½ gallon rinse tank OR
½” steam coil in a 9 ½ gallon rinse tank (Recirculating Steam Only)
Full Load Amps
208 Volt
230 Volt
460 Volt
Electric
79.1
71.5
36.8
Gas/Injected Steam
54.1
48.9
25.5
Recirculating Steam
29.1
26.3
14.2
Gas System (Gas Machines Only)
½” gas supply
Natural: 7” W.C. minimum inlet, 6” W.C. main manifold – 48,000 BTU
Propane: 11” W.C. minimum inlet, 10” W.C. main manifold – 46,000 BTU
3” stainless steel chimney on back of machine
Steam System (Steam Models Only)
¾” steam line, 10-15 PSI
23 lbs/hr average – Injected
43 lbs/hr average – Recirculating
Wash System
10 Hp pump recirculates approximately 180 GPM @ 55 PSI
Heat:
Electric – (1) 9 kW heating element
Gas – (2) 24,000 BTU rated infrared burners – 48,000 BTU total
Injected & Recirculating Steam – 10 to 15 PSI, 23 lbs/hr average
40 gallon wash tank
1 ½” copper drain
6” steam exhaust vent companion flange
(Requires PVC, CPVC, or stainless steel field installed duct)
