LVO Manufacturing, Inc.
LVO Manufacturing, Inc.
LVO Manufacturing, Inc.
LVO Manufacturing, Inc.
808 N. 2
nd
Avenue E., P.O. Box 188
Rock Rapids, IA 51246
www.lvomfg.com
(712) 472-3734
1-800-346-5749 Fax (712) 472-2203
__________________________________________________________________________________________________________________________________________________________________
16
2.
Turn the machine off and open the drain valve.
3.
Remove the scrap trays, dump them out, and wash them off in the sink.
4.
Spray down the inside of the machine.
5.
Brush off the heating element (electric models) and anywhere that doesn’t come clean
from spraying with the hose.
Note: On electric models, brushing the element is very important in prolonging
the life of the element.
6.
Check and clean the rinse nozzles.
7.
Spray down the inside of the machine again.
8.
Remove the pump inlet screen and clean it thoroughly in the sink.
Note:
While removing the screen be careful not to allow any debris to fall into the
pump inlet opening.
9.
Replace the pump inlet screen and the scrap tray screens.
10.
Close the drain and leave the machine empty of water until it is to be used again.
