MagniLink Vision TTS
22
User Manual 7944787b | MagniLink Vision TTS
6.5
Configuration
It is possible to configure the system by removing menu options and by
choosing standard function and quick function. It is also possible to
switch the unit to a basic mode. To access the configuration menus. Press
down the function control(E) and level control(F) and keep them held
down until the system says “Configuring pressure for selecting standard
function”. This will bring you to the main menu for configuration. The
following option will be found in the main menu.
Select standard function
To select which menu the unit will return to after a period of inactivity.
Rotate the function control(E) until the unit says "standard function" and
then press the control. Rotate the function control again(E) until the
desired option is read aloud and then press the control. It is possible to
choose between volume, speed, magnification and navigation.
Select quick function
To select which menu the unit will return to when you press the quick
button(4). Rotate the function control(E) until the unit says "quick
function" and then press the control. Rotate the function control again(E)
until the desired option is read aloud and then press the control. It is
possible to choose between volume, speed, magnification and
navigation.
