MagniLink Vision TTS
User Manual 7944787b | MagniLink Vision TTS
11
5.
High contrast mode with artificial colours
Press the button to switch between the various colour
combinations. These colours are available as standard:
Background/Text
Background/Text
White/Black
Red/Black
Black/White
Black/Red
Yellow/Black
Yellow/Blue
Black/Yellow
Blue/Yellow
Green/Black
White/Blue
Black/Green
Blue/White
6.1.2
5 Press
1.
LED
A green light indicates that the system is on. A flashing green light
means that the system is starting up. A slowly flashing yellow light
indicates standby. A red light indicates that something is wrong in
the system. See the chapter on “Troubleshooting”.
2.
Power on/off
Press to start or shut down the system.
3.
Light and contrast control
In picture mode, this control is used to configure the light intensity
in order to optimise reading conditions. Press the upper half to
increase the light intensity and the lower half to decrease it. In
high contrast mode, it is used to set the contrast level. If you hold
in the Picture mode button (7), the level of lighting is adjusted
instead with the Light control.
