User Guide 79 45 816a | MagniLink Vision Split
15
6.
Reference line/bar
Adjust the position of the reference line. Press the right-hand
button to move the horizontal line down. Hold the button in to
change the reference line to vertical and move it to the left. The
reference line then becomes a horizontal bar which diminishes the
viewing area. To make the bar vertical, press the button again. The
left-hand, sunken section of the controls has the opposite effect.
(Using the EUC software, you can adjust the colour and thickness of the
reference line and choose to hide or show the bar or reference line. Please
contact your local retailer for more information. )
7.
Picture mode
Press the button to toggle the picture mode between natural
colours and grey scale.
Lighting adjustment
Hold the button down to temporarily enable adjustment of the
lighting via the lighting configuration (3). This can be used to help
users who are sensitive to light, or when reading on blank paper.
The system automatically switches between
ROPC (Reading
Optimized Picture Control) and DPC (Dynamic Picture Control)
when the lighting reaches a certain level. When the lighting
configuration (3) is used to adjust the lighting, it is not possible to
switch between colour and grey scale.
Lights off/on
The lights can be switched on and off by holding the button down
for three seconds. The system switches automatically between
ROPC (Reading Optimized Picture Control) and DPC (Dynamic
Picture Control).
(The light settings can be locked and grey scale removed using the EUC
software. Please contact your local retailer for more information.)
