14
User Guide 79 45 816a | MagniLink Vision Split
5.3
Description of features
The active camera image is highlighted with an orange frame. A basic tip
for operating cameras, when more than one camera is connected, is that
the camera whose image
is on-screen is automatically the one which can
be operated using the control box's camera section. (Selecting which
camera to operate is only necessary when two cameras are used
simultaneously).
1.
LED
A green light indicates that the system is on. A flashing green light
means that the system is starting up. A slowly flashing yellow light
indicates standby. A red light indicates that something is wrong in
the system (see the chapter “Troubleshooting”).
2.
Power on/off
Press to start or shut down the system.
3.
Lighting configuration
By pressing these buttons it is possible to adjust the brightness.
Press up to increase and down to decrease the brightness. When
the picture mode button (7) is pressed, the lamp’s intensity is
adjusted instead. In this way, the best conditions for reading in
different situations can be achieved.
4.
Autofocus on/off
Press the button once to lock the focus. This can be used when you
want to write by hand. In this way, autofocus is not affected by the
pen or your hand. Press the button a second time to reactivate
autofocus. Autofocus is active whenever the system starts.
5.
Magnification control
These two buttons are used to set the magnification. Reduce the
magnification by pressing the lower key (minus) and increase the
magnification by pressing the upper key (plus).
