MagniLink PRO - PC
28
User Manual 7944070a | MagniLink PRO - PC
This command stops the reading. The next reading will
begin from the start of the text.
3
Read previous
With this command, the user can go backwards through
the text. If the reading mode is set to character, one
character is read for each keystroke. If the reading mode
is word, you move backwards through the text word by
word. If the reading mode is sentence, you move
backwards through the text one line at a time.
4
Read next
With this command, the user can move forward in the
text. If the reading mode is set as character, one
character is read for each keystroke. If the reading mode
is word, you move forward through the text word by
word. If the reading mode is line, you move forward
through the text one line at a time.
5
Switch reading mode
This command selects the reading mode that is to be
employed when the "Read previous/next" command is
entered. There are three modes: character, word and
line.
6
Slower
Reduces the reading speed.
7
Faster
Increases the reading speed.
8
Reduce volume
9
Increase volume
0
Next voice
Switches to the next installed voice. This command also
changes the OCR engine's language to the new voice's
language.
The following functions are available when MagniLink S is used together
with ZoomText or SuperNova:
Shift + Up arrow
Moves the split screen mode to the left/up.
Shift + Down arrow
Moves the split screen mode to the right/down.
