3. Assembly Process
1.
First at all, you should place the MainPart on a flat.
2.
Unscrew the two screws on the back of the MainPart, so you can open it’s
back (fig.3)
Fig.3 Unfix the back
3.
Unscrew the screw and washer on the end of the ShortRod (fig.4)
Fig.4 Unscrew screw and washer
4.
Fit the ShortRod on the MainPart according to the place showed in figure 5.
In this step, do not make the screw completely fixed, so that you can adjust
the position of the ShortRod.
9
