background image

VI. TROUBLE  SHOOTING

If you are concerned about the performance of  your  TV  please  check  the  following  chart
for possible solutions. If the  problem  still  exists  please contact  your  supplying  dealer  who
may be able to offer additional advice. 

PROBLEM

CHECK  ITEM

No picture on screen and
no sound from speakers. 

Insert  the  AC  power  cord  plug  securely  in  AC
power outlet . Make  sure  the  remote  control  is
not on standby.  

No picture / No picture
from AV terminal. 

Check  the  brightness  setting  of   the  display.
Make sure a  cable  with  no  VIDEO  input  signal
is  connected  to  the  S-VIDEO  INPUT  terminal.
Check the input source is set to AV mode.  

Picture is displayed,
but no sound from the
speakers.  

Check the sound setting. Make sure the sound
is  not  muted.  Make   sure   the   speakers   are
connected properly. Make sure the connectors
of  the  optional  speaker  system  are  securely
inserted.

Remote control does
not work. 

Change  the  batteries. Make  sure  the   infrared
transmitter  window is  not receiving strong light
such as light from fluorescent lamps.  

The picture is not sharp.
The picture moves. 

The  reception  may  be  weak. The  state  of  the
broadcast   may   also   be   bad. Make   sure   the
antenna  is  facing  the  right direction. Make sure
the outside antenna is not disconnected.

The picture is doubled
or tripled. 
(TV mode only)

Picture is too dark.

Make sure BRIGHTNESS setting  is  not  set  too low.
Check to see BRIGHTNESS setting.

Make  sure   the  antenna   is   facing   the  right
direction. There may be reflected  electric  waves
from mountains or buildings.

12

User  Manual

11

User  Manual

Summary of Contents for 15"












Reviews: