3
Aim the remote control at the infrared receiver window on the television When using.
Avoid excessive pressure, dropping and disassembling of the remote control
Avoid pressing keys continuously and quickly, Interval between sequential operations
should be at least 2 seconds.
NOTE
1. Connect the TV
Make sure that LCD TV is power off
Insert the CATV cable into antenna socket
Turn on the TV
Select TV mode
Control the volume by VOL- / VOL+
Using CH+/CH- to choose the channel
LCD TV can be turned off by power button on remote control
IV. CONNECTION
2. Connect to AV/S-VIDEO device
Make sure that both of AV/S-Video device and monitor are power off
Connect AV device and LCD TV with AV cable or S-VIDEO cable
Connect audio cable into the audio input jack on LCD TV
Turn on the LCD TV , then turn on the AV/S-VIDEO device
Select AV or S-VEDIO mode
Control the volume by VOL- / VOL+
LCD TV can be turned off by power button on remote control
3. Connect to the PC
Make sure that both of PC and LCD TV are power off
Connect PC and LCD TV with the D type VGA cable. Fasten the screws.
Insert the AC adaptor port into power input jack, connect another port to the power
supply (Range from 110V to 240V).
Connect the audio cable
Turn the LCD TV on , and then turn on the PC
Set the input source to PC mode
Control the volume by
LCD TV can be turned off by the power button on remote control
4
User Manual
V. On Screen Display (OSD) MENU
In this manual, the OSD ( On Screen Display) may be different from
your TV s, because this is just an example for the TV operation.
User Manual
Summary of Contents for 15"
Page 5: ...5 User Manual 6 User Manual ...
Page 6: ...7 User Manual 8 User Manual ...
