233
User Guide
© 2014 Luxul. All Rights Reserved.
Other trademarks and registered trademarks are the property of their respective owners
Choose the menu
SNMP>>SNMP Notifi cation>>SNMP Notifi cation Confi g
to load the
following page.
Figure 13-8 SNMP Notifi cation Confi g
The following entries are displayed on this screen:
Create Notifi cation
IP Address:
Enter the IP Address of the Management Station.
UDP Port:
Enter the UDP Port used to send SNMP Notifi cations. Default is 162
User:
Enter the Username for the Management Station.
Security Model:
Select the Security Model of the Management Station.
Security Level:
Select the Security Level for the User (SNMP v3 only).
noAuthNoPriv: No Authentication and No Privacy Security Level is
used.
authNoPriv: Only the Authentication Security Level is used.
authPriv: Both the Authentication and Privacy Security Levels are used.
Type:
Select the type for the SNMP Notifi cation.
Trap: Indicates Trap messages are sent.
Inform: Indicates Inform messages are sent. Inform messages have
higher security than Trap type messages.
