User Guide
4
© Copyright 2011 Luxul. All rights reserved. Trademarks & Registered Trademarks are property of respective holders.
1: PRODUCT OVERVIEW
1.1 Product Introduction
Congratulations on your purchase of the Luxul XMS-1008P Gigabit Ethernet
Smart POE Switch, featuring XenSmart™ network management. The XenSmart
management interface provides a powerful, yet simple method for setting up and
optimizing an intelligent home or offi ce network. The XMS-1008P features power-
ful network optimization capabilities, including extensive support for port manage-
ment, port security, Quality of Service (QoS), VLAN confi guration, port trunking and
15.4W of available power per port. Other features such as 802.1X authentication,
Rapid Spanning Tree Protocol (RSTP), IGMP Snooping, static MAC address table,
and port traffi c statistics further enable a robust, powerful network environment.
The XMS-1008P provides 8 10/100/1000 Mbps RJ-45 ports and 2 SFP optical/cop-
per module expansion ports. The SFP ports can be used as uplinks for extending
the network between switches or for long range communications and extensions.
Optical fi ber can be used to effi ciently deliver data at distances of up to 49 miles as
opposed to the 300 foot limitation of standard twisted pair Ethernet.
1.2 Product Features
Complies with IEEE802.3, IEEE802.3u, IEEE802.3ab and IEEE802.3z Ethernet
standards.
8 10/100/1000 Mbps RJ-45 ports, and supports Auto MDI/ MDIX
2 SFP optical module expansion ports
IEEE802.3af POE (Power Over Ethernet) providing up to 15.4W of output power
per port
IEEE802.3x full-duplex fl ow control and half-duplex backpressure fl ow control
Store-and-forward switching
20Gbps backplane bandwidth, supporting non-blocking line speed transfer
Supports up to 10 groups of port-based VLANs and up to 128 groups
of tagged VLANs based on IEEE 802.1Q, with VLAN IDs ranging 1 ~ 4094
IEEE 802.3ad port trunk support provides 4 trunking groups, each of which can
contain up to 10 port members
8K MAC address table; Supports up to 128 static MAC address entries
QoS functions: Mapping mode by port, IEEE802.1p, and TOS priorities. Automatic
control for the transfer queue based on 4 priorities
Provides control over port access security, including port MAC address fi ltering,
binding and aging
