background image

Quick Install Guide

XAP-310

14203 Minuteman Drive, Suite 201, Draper, UT 84020-1685 | luxul.com | 801-822-5450

LUX-QIG-XAP-310 029150954

2

Quick Install Guide

Model Number: XAP-310 
Wireless 300N Low Profile Access Point

FCC ID: W59XAP310 
IC: 8584A-XAP310

© 2015  Luxul. All Rights Reserved.

No part of this publication may be modified or adapted in any way, for any 
purposes without permission in writing from Luxul. The material in this manual 
is subject to change without notice. Luxul reserves the right to make changes to 
any product to improve reliability, function, or design. No license is granted, either 
expressly or by implication or otherwise under any Luxul intellectual property rights. 
An implied license only exists for equipment, circuits and subsystems contained in 
this or any Luxul product. 

DOCUMENT CONVENTIONS

These graphical alerts are used in this document to indicate notable situations:

 

NOTE:

  Tips, hints, or special requirements that you should take note of.

 

CAUTION:

  Care is required. Disregarding a caution can result in data 

loss or equipment malfunction.

 

WARNING!:  

Indicates a condition or procedure that could result in 
personal injury or equipment damage.

FCC COMPLIANCE

This device complies with Part 15 of the FCC Rules. Operation is subject to the 
following two conditions: (1) this device may not cause harmful interference, and 
(2) this device must accept any interference received, including interference that 
may cause undesired operation.

CONTACT LUXUL

Sales

P: 801-822-5450 
E: [email protected]

Technical Support

P: 801-822-5450 
E: [email protected]

Summary of Contents for XAP-310













Reviews: