ShoCk-WAV SiGnAL booStER USER GUidE
3
• Verify that the power connector and socket are accessible at all times during the
operation of the equipment.
• Do not work with power circuits in dimly lit spaces.
• Do not install this equipment or work with its power circuits during thunderstorms or
other weather conditions that could cause a power surge.
• Verify there is adequate ventilation around the device, and that ambient temperatures meet
equipment operation specifications.
• Products outside the approved configurations may be in violation of Part 15 of the FCC Rules.
1.3 Site PrePArAtion
• Consult your site survey and network analysis reports to determine
specific equipment placement, power drops, and so on.
• Assign installation responsibility to the appropriate personnel.
• Identify and document where all installed components are located.
• Provide a sufficient number of power drops for your equipment.
• Ensure adequate, dust-free ventilation to all installed equipment.
• Identify and prepare Ethernet and console port connections.
• Verify that cable lengths are within the maximum allowable distances
for optimal and certified signal transmission.
1.4 ProFeSSionAl inStAllAtion ConSiderAtionS
CAUTION:
Operation of the signal booster without regulatory approval is illegal
The Luxul Wireless Pro-WAV Wi-Fi Range Extender System is required to be professionally
installed. The following components are approved for use in the system.
• Luxul PW-FC1 Wi-Fi Signal Booster
• Luxul Wireless X-WAV XW-24-FP7 Flat Panel Antenna
• D-Link DWL-2100AP Wireless Access Point
The output power of the amplifier is set and tested during manufacturing. There are no user
modifiable parameters in the amplifier. The Luxul Shock-WAV Wi-Fi Signal Booster system
incorporates a Digital AGC (D-AGC) that ensures a consistent and approved output power.
Please reference section 4 for installation instructions.
