2
1 - introduCtion
The Luxul Wireless Pro-WAV Wi-Fi Range Extender System is designed to complement and
enhance the performance of the Netgear WG103 Wireless Access Point (WAP). When com-
bined with the WG103 and X-WAV XW-24-FP7 Flat Panel Antenna, it delivers up to the maximum
approved transmit power, resulting in a farther reaching and higher performing network.
Luxul Wireless Pro-WAV Wi-Fi Range Extender System feature patented RF technology that
dynamically optimizes output strength and provides the cleanest, most consistent signal
amplification available for Wi-Fi networks. Designed for bidirectional signal amplification,
Shock-WAV Wi-Fi Signal Boosters utilize patented Digital Automatic Gain Control (D-AGC) tech-
nology that actively monitors the incoming signal from each packet and makes adjustments so
that the output signal maintains constant power levels, ensuring the cleanest and most consistent
RF signal possible.
1.1 doCument ConVentionS
The following graphical alerts are used in this document to indicate notable situations:
NOTE:
Tips, hints, or special requirements that you should take note of.
CAUTION:
Care is required. Disregarding a caution can result in data loss or
equipment malfunction.
WARNING!:
Indicates a condition or procedure that could result in personal injury
or equipment damage.
1.2 WArningS
• Read all installation instructions and site survey reports, and verify correct equipment installation
before connecting the Shock-WAV Wi-Fi Signal Booster or WG103 to its power source.
• Remove jewelry and watches before installing this equipment.
• Verify that the unit is grounded before connecting it to the power source.
• Verify that any device connected to this unit is properly wired and grounded.
• Connect all power cords to a properly wired and grounded electrical circuit.
• Verify that the electrical circuits have appropriate overload protection.
• Attach only approved power cords to the device.
