ShocK-WAV SiGnAl booStER USER GUidE
13
• Connect the equipment into an outlet on a circuit different from that to
which the receiver is connected
• Consult the dealer or an experienced radio/TV technician for help.
6.4 rAdio trAnSmitterS (PArt 15)
This device complies with Part 15 of the FCC Rules. Operation is subject to the
following two conditions: (1) this device may not cause harmful interference, and
(2) this device must accept any interference received, including interference that
may cause undesired operation.
6.5 induStry CAnAdA ( rSS-gen iSSue 2)
In accordance with Industry Canada Regulations, this radio frequency power amplifier may
only be used with a transmitter with which the amplifier has been certified by Industry Canada.
The Industry Canada Identification Number for the transmitter with which this amplifier is
permitted to operate is 4054A-08400097.
This PW-FC2 - Single Antenna is designed to work with one XW-24-FP7 antenna. This PW-FC2 -
dual Antenna is designed to work with two XW-24-FP7 antennas. The XW-24-FP7 antenna has a
maximum linear gain of 4dBi or maximum CP gain of 7dBi. Any antenna having a gain greater than
4dBi are strictly prohibited for use with this device. The required antenna impedance is 50 ohms.
Operation is subject to the following two conditions: (1) this device may not cause interfer-
ence, and (2) this device must accept any interference, including interference that may cause
undesired operation of the device.
To reduce potential radio interference to other users, the antenna type and its gain should
be so chosen that the equivalent isotropically radiated power (e.i.r.p.) is not more than that
permitted for successful communication.
7 - SAleS And SuPPort ContACtS
For Sales Assistance:
For technical Assistance:
801-822-5600
