Luxul AMS-1208P, Quick Setup Manual

Page: 5 / 32

3
If„your„network„uses„an„address„scheme„other„than„192.168.0.X,„you’ll„need„to„set„a„temporary„static„IP„address„on„the„
computer„you’re„using„for„configuration.„To„do„so,„set„the„IP„address„of„your„computer„to„an„address„in„the„192.168.0.X„
range,„then„set„the„Gateway/Router„address„to„192.168.0.4„(or„192.168.0.3„if„you’r„econfiguring„an„AMS-1208P).
Once„you’re„finished„configuring„the„switch,„you„can„return„your„computer’s„IP„configuration„to„normal,„typically„“Obtain„
Automatically/DHCP.”
c
n
NOTE: cccVisitc http://luxul.com/ip-addressing ctoclearncmorecaboutcchangingcyourccomputer’scIPcaddresscandcgettingc
connected.
4
Access and Setup
Getting Connected
Use„an„Ethernet„cable„to„connect„your„computer„to„the„switch,„then„power„on„the„switch.
Logging In
To„access„the„Luxul„managed„switch„web„configuration,„open„your„web„browser„and„enter„the„default„192.168.0.4„IP„
address„in„the„address„field„(or„192.168.0.3„for„the„AMS-1208P).„Log„in„to„the„switch„using„the„default„user„name„„
and„password:
„
Default IP: 192.168.0.4 (or 192.168.0.3 for the AMS-1208P)
Username: admin
Password: admin
Continue„with„configuration„as„described„in„the„next„chapter,„Quick„Setup:„System.
5
Hardware Operation
The„front„panel„of„the„AMS-series„switches„include„dual-color„Link/Activity„LEDs„that„can„be„switched„from„green„to„
blue.„In„addition,„the„front„panel„has„Link/Activity„and„PoE„mode„indicators„as„well„as„System„and„Power„LEDs.
Indicator
State Description
POWER
On The„switch„is„powered„on.„„
Off The„swith„is„powered„off„or„not„connected„
to„AC„power.„Check„power„connections„and„
power„switch„at„the„back„of„the„unit.„
Link/Act
On There„is„a„device„connected„to„the„port.„
Flashing Port„is„receiving„or„transmitting„data.
Off No„device„is„connected„to„the„port.„
1000„Mbps On
A„1000„Mbps-capable„device„is„connected.„„
Off No„device„is„connected„and/or„the„device„is„
not„1000„Mbps-capable.„
PoE
On A„PoE-enabled„device„is„connected„and„the„
switch„is„supplying„power„to„the„device.
Off No„PoE-enabled„device„is„connected„or„PoE„is„
not„enabled„on„this„port
SYSTEM
On The„switch„is„booting.„
Flashing The„switch„is„running„normally.„
Off The„switch„is„in„startup„and„initialization„
process„or„is„not„on.„
At„startup,„port„LEDs„will„flash„for„1„second„as„a„self„test.