Luxul AMS-1208P, Quick Setup Manual

Page: 29 / 32

27
AdminEdge: „Allows„you„to„set„whether„the„Port„is„connected„directly„to„an„Edge„Device.„This„allows„Transition„to„
the„Forwarding„State„Faster„for„Edge„Ports„than„non-Edge„Ports.„The„value„of„this„flag„is„based„on„the„AdminEdge„and„
AutoEdge„settings.„When„set„to„Edge„it„is„displayed„as„Edge„in„Monitor>Spanning„Tree>Port„Status.„
„ X
Edge: „The„Port„has„been„set„as„an„Edge„Port„and„will„Transition„to„Forwarding„state„faster.
„
X
Non-Edge:
„The„Port„is„not„set„as„an„Edge„Port„and„will„follow„normal„Transition„timing.„This„is„the„default„value.
„ X
AutoEdge: „Allows„you„to„set„whether„the„Switch„should„attempt„Edge„Port„detection.„This„allows„the„AdminEdge„
state„to„be„derived„from„whether„BPDU’s„are„received„on„the„Port„or„not.„
Restricted Role:
„Allows„you„to„Restrict„the„Port„so„it„will„not„to„be„selected„as„Root„Port„for„the„CIST„or„any„MSTI,„even„
if„it„has„the„best„Spanning„Tree„Priority.„The„Port„will„be„selected„as„a„Backup„after„the„Root„Port„has„been„selected.„
Restricted„Role„can„be„set„by„the„Network„Administrator„to„prevent„bridges„external„to„a„core„region„of„the„Network„
from„influencing„the„Spanning„Tree„Active„Topology.„This„feature„is„also„known„as„Root„Guard.
c
w
Warning: cThiscsettingccanccauseclackcofcSpanningcTreecconnectivity.c
Restricted TCN:
„Allows„you„to„Restrict„the„Port„so„it„will„not„Propagate„Received„Topology„Change„Notifications„and„
Topology„Changes„to„other„Ports.„Restricted„TCN„can„be„set„by„the„Network„Administrator„to„prevent„bridges„external„
to„a„core„region„of„the„Network„from„causing„Address„flushing„within„that„region.„An„example„of„use„would„be„when„the„
Physical„Link„State„of„an„attached„LAN(s)„Transitions„frequently.„
c
n
NOTE: cThiscsettingccanccausectemporaryclosscofcconnectivitycaftercchangesctocacSpanningcTreecActivecTopologycascacresultcofc
incorrectclearnedcstationclocationcinformation.
BPDU Guard:
„Allows„you„to„set„the„Port„to„Disable„itself„upon„receiving„valid„BPDU’s.„Port„Edge„status„will„not„affect„
this„setting.„A„Port„that„has„entered„error-Disabled„State„due„to„this„setting„is„subject„to„the„bridge„Port„Error„Recovery„
setting„as„well.„
Point to Point: „Allows„you„to„set„whether„the„Port„connects„to„a„Point-to-Point„LAN„rather„than„to„a„Shared„Medium.„
„
X
Auto:
„Point-to-Point„status„is„Automatically„detected.„This„is„the„default„setting.
„ X
Forced True: „Allows„you„to„Force„the„Switch„into„the„Point-to-Point„configuration.
„ X
Forced False: „Allows„you„to„Force„the„Switch„to„Disable„the„Point-to-Point„configuration.„
c
n
NOTE: cTransitionctocthecForwardingcStateciscfastercforcPoint-to-PointcLANscthancforcSharedcMedia.c
c X
Save: cClickctocsavecanycunsavedcchanges.
c X
Reset:
cClickctoccancelcanycunsavedcchangescandcrevertctocpreviously-savedcvalues.cNotcavailableconcecchangescarecsaved.