ADJUSTMENTS
Figure 5
Joystick
Slack (fiber optic cable)
Upper gown clip
Lower gown clip
CAUTION: The metal portions of the cable at the
light source get hot during operation. Allow
components to cool outside of the light source for
at least 5 minutes before touching.
Luxtec manufactures its headlights to the highest
quality standards. Each one is tested thoroughly
before leaving the factory to ensure proper working
conditions.
These instructions should help you get started with
your new Luxtec equipment, quickly and easily. If
you have any problems, please contact the Luxtec
Service Department, (800) 325-8966, or
(508) 835-9700, Fax (508) 835-9976.
REPLACEMENT PARTS
5
Part Number
Description
AX-1375-BIF
Headband with Ultralite 2 bifurcated cable, Ultralite module and extended linkage
AX-1385-BIF
Sweatband with Ultralite 2 bifurcated cable, Ultralite module and extended linkage
AX-1375-BIF-SL Headband with Ultralite 2 bifurcated cable and Ultralite module
AX-1385-BIF-SL Sweatband with Ultralite 2 bifurcated cable and Ultralite module
AX-1175-BIF
Headband with bifurcated cable, Ultralite module and extended linkage
AX-1185-BIF Sweatband with bifurcated cable, Ultralite module and extended linkage
AX-1175-BIF-SL Headband with bifurcated cable and Ultralite module
AX-1185-BIF-SL Sweatband with bifurcated cable and Ultralite module
00-1170-BIF Replacement headband for AX-1175-BIF or AX-1175-BIF-SL
00-1190
Module (gray)
00-1190-EL Module (gray) with extended linkage
00-1270-BIF
Replacement headband for AX-1375-BIF or AX-1375-BIF-SL
00-1290 Sweatband for bifurcated cable
00-1290-BIF Replacement sweatband for AX-1375-BIF or AX-1375-BIF-SL
00-2300-9
Replacement cable bifurcated (add –G for gray cable)
00-2900-9
Ultralite 2 bifurcated cable
400282
Replacement kit pad for headband
400286
Joystick for 00-1190, pack of 3
