MOTION MOTORIZATION
20
Manual control
Advanced Options
i
i
In case there is no controller or pull control, the shade can be
operated with the program button on the motor.
20.1
20.2
Hold the program button to manually operate the shade. The shade will move as long as the
button is being pressed. (max. 15 sec.)
Single select makes it possible to activate program mode on a single shade through a
controller, without having to physically press the program button on the shade.
To activate Single select,
simultaneously hold the
center
button and press
the
pair
button.
The controller starts
searching for shades
(search mode). This is
indicated by the LEDs
flashing from left to
right.
To move the shade in opposite direction, release the
program
button and repeat step 20.1.
21
Single Select (5 Channel Controller)
i
21.1
21.2
Once a shade is found,
the channel LED will flash
and the shade starts
stepping, indicating that
program mode has been
activated. The shade
can now be (un)paired
to the controller and/or
programmed.
To search for
the next shade,
press the
right
button. Search
mode will be
activated. To
find the previous
shade, press the
left button.
To exit Single
select, press
the
right
button during
search mode.
21.3
21.3
21.3
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
15
