When pressing the up or down button on the controller, the shade
directly moves to its end positions (direct control). To operate the shade
with smaller steps using the up and down button, direct control can be
deactivated. Now, the shade only directly moves to its end positions
when the up or down button is held longer than two seconds.
i
16
Reset favorite position
Center
16.1
16.2
16.3
16.4
Move the shade to a desired favorite position.
Press the
program
button on the motor to activate
program mode. The shade starts stepping.
Hold the
center
button to save this favorite position.
The shade shortly stops stepping, indicating the
favorite position has been saved successfully.
Press the
program
button on the motor to deactivate
program mode. The shade stops stepping.
17
Deactivate direct control
17.1
17.2
Press the
program
button on the motor to activate
program mode. The shade starts stepping.
Hold the
program
button until the shade stops
stepping (approximately 5 seconds) to deactivate or
reactivate direct control.
MOTION MOTORIZATION
800.817.1204 1221 Admiral Street Richmond, VA 23220 LuXoutShades.com
13
