Luxor MSP130, Instruction Manual

Page: 24 / 28

24 | ENGLISH
Caution:
Always be sure that the tool is switched
off and unplugged before attempting to perform
inspection for maintenance. In order to maintain
product reliability and safety, repairs, replacement, any
other maintenance or adjustment, and carbon brush
inspection and replacement should be performed by
qualified service personnel.
• Wipe the saw using a well-wrung cloth after use,
and always keep the surface and ventilation holes
free of dirt. Keep the soleplate free of dirt to avoid
the saw cutting incorrectly.
• Never use corrosive or abrasive cleaning agents,
as they may attack the plastic parts of the saw.
• When the carbon brushes wear out the tool will
spark and/or stop. The brushes are a wearing
component of the tool and should be replaced
prior to the carbon wearing out fully. Always
replace both brushes at the same time.
• CAUTION: The carbon brushes must be replaced
by a pair similar carbon brush available through
the after-sales service organization or qualified
professional person.
• CAUTION:
Always disconnect the machine from
the power supply before removing any electrical
covers.
• CAUTION:
Do not use cleaning agents to clean
the plastic parts of the tool. A mild detergent on a
damp cloth is recommended. Water must never
come into contact with the tool.
CLEANING AND MAINTENANCE