English
- 76 -
LED TV and Operating Buttons
FRONT and REAR VIEW
Control buttons VIEW
Control Buttons
Up direction
1.
Down direction
2.
Programme/Volume / AV
3.
/ Standby-On selection
switch
Note:
You can move the switch,
upward or downward to change
the volume. If you want to change
the channel, press the middle of
the switch once (Position 3) and
then move upward or downward. If
you press the middle of the switch
once more, the source OSD will
be displayed. To select desired
source, move the switch upward
or downward and release. If you
press the middle of the switch and
hold for a few seconds, the TV will
switch to standby mode. The Main
menu OSD cannot be displayed via
the control buttons on the TV.
Viewing the Back side Connections
D
I
H
M
1
SPDIF
Coax.OUT
D
I
H
M
2
HDMI 2: HDMI Input
1.
HDMI 1: HDMI Input
2.
HDMI Inputs
are for connecting a device that has an
HDMI
socket. Your LED TV is capable of
displaying High Definition pictures from devices such as a High Definition Satellite Receiver or DVD
Player. These devices must be connected via the HDMI sockets or Component Socket. These sockets
can accept either 720p or 1080p signals. No sound connection is needed for an HDMI to HDMI
connection.
RF Input
3.
connects to an aerial antenna system.
Note that if you use a decoder or a media recorder, you should connect the aerial cable through the
device to the television with an appropriate antenna cable, as shown in the illustration in the following
pages.
SCART input or output for external devices. Connect the SCART cable between SCART socket on TV
4.
