![background image](http://html1.mh-extra.com/html/luxor/led19el/led19el_operating-instructions-manual_1952626040.webp)
English
- 39 -
Viewing the Connections
NOTE: When connecting a device via the Side AV input, you must use the supplied connection cables to enable connection. See the
illustrations above. | YPbPr can be used only when you connect a device that has a YPbPr output through the PC input with YPbPr to PC cable
(YPbPr to PC cable is not supplied). When the connection is made, switch to YPbPr source. To enable PC audio, you will need to use PC/
YPBPR AUDIO CONNECTION WHITE & RED inputs. | If an external device is connected via the SCART socket, the TV will automatically switch
to AV mode.| When receiving DTV channels (Mpeg4 H.264) or while in Media Browser mode, output will not be available via the scart socket. |
When using the wall mounting kit (optional), we recommend that you plug all your cables into the back of the TV before mounting on the wall.
| Insert or remove the CI module only when the TV is SWITCHED OFF. You should refer to the module instruction manual for details of the
settings. Insert the CAM and then the viewing card to the slot that is located in the terminal cover at the rear side of the TV. The module should
be correctly inserted, it is impossible to insert fully if reversed. The CAM or the TV terminal may be damaged if the CAM is forcefully inserted.
Each USB input of your TV supports devices up to 500mA. Connecting devices that have current value above 500mA may damage your TV.
Connector
Type
Cables
Device
12V
DC IN
DC 12 V Input
V+
V+
V-
V-
.
Scart
Connection
(back)
VGA
Connection
(back)
SIDE AV
PC/YPbPr
Audio
Connection
(side)
Side Audio/Video
Connection Cable
(Supplied)
PC Audio Cable
(Not supplied)
HDMI
Connection
(back)
SPDIF
Connection
(back)
SIDE AV
Side AV
Connection
(side)
AV Connection Cable
(supplied)
HEADPHONE
Headphone
Connection
(side)
YPbPr
Video
Connection
(back)
PC to YPbPr Connection Cable (Not supplied)
USB
Connection
(side)
CI
Connection
(side)
CAM
module