![background image](http://html1.mh-extra.com/html/luxor/dvp2000/dvp2000_instruction-manual_1952560021.webp)
ENGLISH | 21
CABLE CONNECTIONS:
1a. Connect an RCA cable between the Video, Left and
Right Output on the back panel of the DVD Player to the
RCA input on your TV.
1b. Connect an HDMI cable between the HDMI Output on the
back panel of the DVD Player to the HDMI input on your TV.
2. If you have a stereo amplifier, connect a coaxial cable
between the Coaxial Output on the back panel of the DVD
Player to the coaxial input on your stereo.
3. Control the playback via the Remote Control.
DVD OPERATION:
1. Press the Open/Close button on the front panel or the
Remote Control and place a DVD disc on the Disc Tray.
2. Press the Open/Close button again to close.
3. The DVD will read the DVD disc and begin the playback.
4. Control the playback via the Remote Control.
USB OPERATION:
1. Insert a USB unit into the USB Port on the front panel of the
DVD Player.
2. Press the USB button on the Remote Control to enter the USB
source. The DVD Player will read and display the file list of
the USB unit.
3. Browse the file list by pressing the
5
/
6
/
3
/
4
buttons on the
Remote Control. Select a file by pressing the OK button on
the Remote Control.
SYSTEM SETUP:
1. Press the Setup button on the Remote Control to open the
setup of the DVD Player.
2. There are four different menus in the setup, General,
Audio, Video and Preference. Follow the instructions in the
paragraphs ‘General Setup‘, ‘Audio Setup‘, ‘Video Setup‘
and ‘Preference Setup‘.
3. To close the setup of the DVD Player, press the Setup button
on the Remote Control.
TV
Stereo
1a.
1b.
2.
OPERATION